Step 4 : Attach the front and rear frame
Attach the gable sections to front and rear frame. Slide and snap into position the midwall brace sections and than snap into position roof beams and cross beams.
Step 5 : Assemble the wall panels
Attach the wall panels into the channel of the frame, then connect the corner panels and snap in the other side. Snap on the rounded corner panels and the panel connecting strips.
Step 6 : Attach the roof
Assemble the roof panels and two trim sections and attach with screws. Snap on the roof corners and peak caps.
Step 7 : Install the door and lock
Slide the doors onto its hinge pins and then install the door handle and lock.
Photos courtesy Sears
Page 2 of 2
Back to Page 1
Carpeting Calculator