By Gene and Katie Hamilton
Since the water supply to a washing machine is always on, a plumbing disaster is waiting to happen if the hoses fail or leak and they may if they’re old. A leak is bad enough, but if both the hot and cold lines fail at the same time and no one is home to turn off the water, it can be a very costly repair. Periodically check the hoses, and if they look worn, replace them with new burst-resistant metal mesh hoses.
A plumber will charge $150 to make this repair, but you can do it yourself for $25, the cost of the replacement hoses, and save 83 percent for your effort.
The job involves turning off the water supply to the hoses and then relieving the pressure by turning the washer on to a warm fill cycle for 5 seconds. Use adjustable pliers to loosen one hose at a time from the water supply, and then from the machine. Have a bucket handy to catch the water that spills out of the hose. Before installing the new hose, check to see that it has a rubber washer in each end. Replace the other hose in the same way, and turn the water supply on and check for leaks.
Don't want to get involved doing this job yourself? Click here to get to
and it will open in a new tab and you’ll have to answer some basic questions about your job followed by Plumbers in your area.
Here's instructions from My Frugal Home about How to Replace Washing Machine Hoses.
The bottom line: compare the price of a contractor’s bid to replace washer hoses with what it costs to do it yourself and make your decision. You adjust the cost to where you live by adding your ZIP Code.
Cost updated 2018
The cost and time data is generated by averaging labor and material data from annually updated cost books used by contractors and refined by the authors'
experience remodeling 13 houses. They are authors of 20 home improvement books and Do It Yourself or Not, a weekly column syndicated by Tribune Content
Agency. The national cost can be adjusted by ZIP Code.