By Gene and Katie Hamilton
Limit the use of expensive air conditioning to those dog days of summer and consider installing an attic fan to cool down the house when it's not so hot. An attic or whole-house fan are designed to work best in the evening when temperatures are at their coolest. Open windows and turn on the fan so that it draws in cool, fresh air and forces it out through attic vents and by morning you'll be reaching for a blanket. An electrician charges $577 to install a direct-drive attic fan that cools a typical 1,500-square-foot house. This includes the labor and material. A homeowner with electrical and carpentry skills can buy one for $200 and install it, cutting the cost by 65 percent. The project involves some major work: cutting an opening in the ceiling, installing the unit in the opening, hooking up the wires and then adding the louvered cover panel. Timewise, a homeowner can do the job in a long day of work compared with an electrician who can make the installation in half the time.
Follow the fan manufacturer's directions about wiring the unit into your home's electrical system and to any switches or controls you choose. For the easiest installation, choose a direct-drive unit that's designed to fit over the attic floor joists so that you don't have to cut into them. You'll find these units sold at home centers and lumberyards. At www.airvent.com in the Resources section you'll find advice and an attic ventilation calculator.
The Home Ventilating Institute suggests how to find the right size for a whole house fan. Walk around the exterior of the house and measure its length times its width to get the total square footage of the house. Let’s say it’s 35 x 40 feet, which equals 1400 square feet.
To find the size of whole house fan, multiply the square footage times three. 1400 x 3 = 4200 CFM (cubic feet per minute.)
That means, buy a fan whole house fan with a 4200 CFM to effectively cool the house.
Here's more ventilation information from the Home Ventilating Institute Consumer Publications for Homeowners.
Now you know the average cost to install an attic fan which includes the labor and material, and what’s involved, so you can decide to do it yourself or hire a contractor. Don’t forget to adjust the cost to where you live by adding your ZIP Code.
Improvement and Repair Cost Updated 2019
The cost and time data is generated by averaging labor and material data from annually updated cost books used by contractors and refined by the authors'
experience remodeling 13 houses. They are authors of 20 home improvement books and Do It Yourself or Not, a weekly column syndicated by Tribune Content
Agency. The national cost can be adjusted by ZIP Code.